Publicité
Les langues disponibles
Les langues disponibles
CONTROL DEVICES AND CONTROLS
Fig 6 Adjustable trip distance function
Fig 7 ODO function
Fig 8 ART function
Fig 9 Clock function
Fig 10 Low battery/ Low
battery error function
94
DST and DST2 can be incremented or decremented
by the user.
DST set up (screen 1) Hold the left Button down for
3 seconds
to decrement/ Hold the right Button to increment
back to screen 1.
DST set up (screen 2) Hold the left Button down for
3 seconds DST2» icon will flash Hold left Button
to decrement/ Hold the right Button to increment
back to screen 2.
ODO function Odometer (screen 3):
displays the total mileage traveled by the vehicle.
The total distance is displayed in the selected units,
km/h (default) or mph. (p.99).
This information can not be reset to 0.
Beyond 399 999 km (or miles), the counter goes
back to 0.
ART function Accumulated Ride Time (screen 3):
displays the hours of operation of the vehicle.
This information can not be reset to 0.
Until 99h59min
increments. After 99h59min up to 9999h
in one hour increments If the unit should reach 9999
hours of accumulated ride time, the display will stop
incrementing, and will remain at that number.
Clock function (screens 1 et 2):
displays clock information.
Low battery/ Low battery error function:
When the battery voltage drops to less than 2.40V, the LO battery
warning will turn on.
When the internal battery is critically low, the unit will only display
a blinking «LO» icon.
DST» icon will flash
Hold left Button
displayed in one minute
displayed
Publicité
