Publicité
Les langues disponibles
Les langues disponibles
COOLING SYSTEM
3
DRAINING THE COOLANT
1
100
Check the fluid level in the expansion container.
The liquid should reach the level on the container
where it indicates "LEVEL MIN".
If the level is not correct, unscrew the cap
Fill with fluid until it reaches the LEVEL MIN mark.
Approved Coolant
Replace the cap
Make sure the motorbike is upright and on level ground.
- Place a container under the bike.
- Remove the cap
- Allow the coolant to drain.
2
To protect the environment, dispose of the drained liquid to a
collection point.
Motul
Factory Line -35°C
.
3
WARNING
and screw
1
NOTE
.
3
®
Motocool
.
2
Publicité
