Beta 1760PA Mode D'emploi page 43

All manuals and user guides at all-guides.com
fREQUENCY MEASUREMENT
1 Set the function switch to [v
Frequency range.
2 Press the [MODE] button for 3 seconds to select the Frequency range. The meter automatically
defaults to DC Volts.
Insert the red test lead into the [V Ω TEMP HZ] input terminal and the black lead to the
3
[COM]. terminal.
4 Connect the other end of the test leads to the
circuit or component under test. Take the reading
on the display.
Note:
In the Frequency range the meter is Auto Ranging
only
Hz] range position. The meter automatically defaults to
Measuring Frequency on AC