Beta 1760PA Mode D'emploi page 40

All manuals and user guides at all-guides.com
AC TRUE RMS vOLTAGE MEASUREMENT
1 Set the function switch to [ v
2 Press the [ MODE ] button to select the AC Volt range. The meter automatically defaults to
DC Volts.
3 Insert the red test lead into the [ V Ω TEMP HZ ] input terminal and the black lead to the
[COM] terminal.
4 Connect the other end of the test leads to the circuit under test. Take the reading on the
display.
Note:
The meter is set to default to "Auto Range"
•
Pressing the[ PEAk ] button will allow the user to record
•
the peak maximum and minimum readings on the AC volt
range. See page 47 for further instructions for "PEAK"
Hold function.
Hz ] range position.
AC supply
0