Beta 1760PA Mode D'emploi page 41

All manuals and user guides at all-guides.com
RESISTANCE MEASUREMENT
1 Set the function switch to [
resistance range.
Insert the red test lead into the "V Ω TEMP HZ" input terminal and the black lead to the
2
[COM] terminal.
3 Connect the other end of the test leads to the circuit or component under test. Take the reading
on the display.
Note: The meter is set to default to "Auto Range" mode
WARNING:
before attempting to make a resistance measurement,
ensure there is no voltage present on the circuit under test.
si trova collegata la resistenza.
Ω ] range position. The meter automatically defaults to
Measurament elettric resistor
1