Irritrol LIFE Controller 4 Référence Rapide page 6

Irritrol LIFE Controller 4 _ 6 _ 8
PROGRAMMING MODULE
10. Settings Button - To set Controller's parameters.
11. Test Button - To run a program to check hydraulic and electric station
operation.
12. Manual Program(s) Button
operation.
13. Manual Station(s) Button
14. Pause Button - Turn off and prevents automatic station operation.
15. Start/Stop Button - To start or stop manual program(s) and station(s) and
test program(s).
16. and Button - Press to increase or decrease display number values and
various functions.
17. and Button - Press to select next or previous function parameter.
18. Reset Button - Momentarily insert a clip to press the hidden Reset button to
restart operations.
19. LCD Display
6
All manuals and user guides at all-guides.com
- To select watering programs for manual
- To select station(s) for manual operation.
20. Symbol - Displayed when the Time duration shown is in minutes and
seconds.
21. Symbol – Displayed when 24VAC is missing or the Control Module is
removed from the Back Module.
22. Symbol - Diplayed when automatic irrigation is on Pause.*
23. Symbol - Displayed when sensor is active.*
24. Symbol - Displayed when a Watering Budget run time duration adjustment
is in use.
25. Symbol - Displayed when 12H time format is used.
26. Symbol - Displayed when irrigation currently on.
27. Symbol - Displayed to identify the number of the selection within a
function.
28. 2-digit - number representing the shown selection.
29. Symbol - Displayed when an irrigation program is selected.
30. 1-Character – identifies the irrigation Program selected or M for Master Valve.
* When both displayed, Rain Sensor is active