Irritrol LIFE Controller 4 Référence Rapide page 13

CONTROL OPERATIONS
Manual Program Operation
Manual program operation enables automatic watering programs to be manually
started.
1. Press the Manual Program button.
The selected program number will be displayed.
2. Press either the or button to select the desired program, A or B, to be
turned ON manually.
3. To manually start a watering cycle for a program that is currently OFF (the symbol
is off to indicate the program's watering cycle is OFF) press the Start/Stop
button. The symbol is turned on to indicate the watering cycle is ON.
Note: if the maximum number of stations that can be turned ON has been reached,
pressing the Start/Stop button will not start the watering cycle and the
display shows STACK.
All manuals and user guides at all-guides.com
4. To manually advance through the station sequence, for the selected program,
5. To manually cancel the STACK condition for the selected program and set it back to
6. To manually terminate a watering cycle for a program that is currently ON (the
7. Repeat steps 2–6 for additional programs.
Press the Auto
The watering cycles will be delayed (STACKed) until the current watering cycle is
finished.
press the button.
OFF, press the Start/Stop button.
symbol is on to indicate the program's watering cycle is ON), press the Start/
Stop button. The symbol is turned off to indicate the watering cycle is
OFF.
button when finished.
Irritrol LIFE Controller 4 _ 6 _ 8
13