Tripp-Lite SmartOnline Serie Manuel Du Propriétaire page 13

Troubleshooting
Lights (On/Flashing) and Condition
On: FAULT
Flashing: LINE, 50%
Condition: No Output due to Low
Output Voltage and Abnormal Input
On: FAULT, 25%
Flashing: LINE
Condition: No Output due to High
Bus Voltage and Abnormal Input
On: FAULT
Flashing: LINE, 25%
Condition: No Output due to Low
Bus Voltage and Abnormal Input
Flashing: LINE, FAULT
Condition: No Output due to High
Internal Temperature and Abnormal
Input
Battery Replacement
Battery Replacement Door: Under normal
conditions, the original battery in your UPS will
last several years. Battery replacement should
be performed only by qualified service
personnel. Refer to "Battery Warnings" in the
Safety section. Should your UPS require battery
replacement, visit Tripp Lite on the Web at
www.tripplite.com/support/battery/index.cfm to
locate the specific replacement battery for your
UPS.
Procedure
1
Remove Front Panel
2
Disconnect Batteries
3
Remove/Dispose of Batteries
4
Add Batteries
5
Connect Batteries
Attach connectors: black-to-black and red-
to-red.
6
Replace Front Panel
201102199 93-2471.indb 13
All manuals and user guides at all-guides.com
Solution
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Restart the UPS. If the problem persists, contact
Tripp Lite for repairs.
Check the UPS to be sure that there is adequate
space for air to circulate near the vents and that
the fan is working properly. Restart the UPS. If the
problem persists, contact Tripp Lite for repairs.
13
1
2

3

6
5
4
3/30/2011 9:14:05 AM