Ibiza Light STROBE80LED Manuel D'utilisation page 11

GB – 8-CHANNEL LIGHT SWITCH CONTROLLER
I. Preface
Thank you for using our 8-channel light switch controller. For your safety, please read the
User's Manual carefully before you operate the unit.
This Manual includes important installation and operation information. Please install and
operate the controller strictly according to the instructions. Power the unit off prior to opening
or repairing the controller.
Please read the complete contents of this manual (please keep this manual in a safe place for
future reference)
We will not take any responsibility for damages to the controller, property loss or body injury
which is caused by incorrect installation, operation and maintenance.
NOTICE: The data in the Manual may change without prior notice due to continuous
improvement of the product. We reserve the right to update any specifications.
Packing Content (accessories)
User's manual (1 PC)
-
- Maintenance Card (1 PC)
Unpacking Instruction
- Please check if all the contents are completed after unpacking. Then, check if the
8-channel light switch controller is undamaged. Please you can keep the original package
and return to the factory if it is damaged
AC Power: Check whether the voltage is accordance with the rated power.
-
Safety Specifications: all the safety items of operation (includes installation) and before
-
operating.
Unpack the carton and take out all the accessories and the 8-channel light switch controller
-
from the carton and put it on a safe, stable surface for operation.
Keep the 8-channel light switch controller in a dry place. Do not use the unit in moisty, hot
-
or dusty environment. Keep away from water or other liquids.
- The installation, operation and maintenance must be managed by a qualified technician.
Make sure to operate it according to the instructions contained in the Manual.
Caution! Please make sure it's power off before any installation, repair and cleaning!
II. Introduction
The product is a special equipment for discos, stage, theaters and other places, only
-
suitable for indoor.
The product is divided into 8 outputs; the maximum output current is 1.5A for each
-
channel.
III. Specifications
Input Voltage ............................................................................................ 220-240Vac, 50Hz
Output Voltage and current ........................................................................ 220-240Vac, 12A
Dimensions .............................................................................................. 500 x 115 x 70mm
Net weight ..................................................................................................................... 1.5kg
IV. Installation
- First, put the 8-channel light switch controller on the special desk, and then connect the
controller and the light through the power line.
Connection of power wire
-
The exclusive wire should be used between the connection of 8-channel light switch
controller and power. Please confirm if the rated voltage and frequency are in accordance
with the power supply.
Please contact the agent or professional for replacement if the power cable is damaged.
The replaced power cable must be same size as original.
Caution: The ground wire(Y/G wire) must be earthed during power connection; the
installation must be in accordance with specified standards.
V. Operation
Turn the switch of the front panel on. The corresponding jack on the rear panel will output
voltage.
Operation Requirement

Please use appropriate safety wire to connect the product.

Please do not arbitrarily modify the product; this may cause short circuits, fire, electric
shocks, etc. The warranty doesn't cover damages due to unauthorized opening of the
housing, repair or changes.
©Copyright LOTRONIC - 2013
2