Publicité
Les langues disponibles
Les langues disponibles
Replacing paper filter
NOTICE:
Be aware to align the logos on all the
dust box, paper filter and dust nozzle in a consis-
tent orientation when reassembling components.
1.
Remove the dust box from the tool.
2.
Detach the dust nozzle from the box while press-
ing and holding the locking latches on both sides of the
box.
3
1
Fig.25
► 1. Dust nozzle 2. Dust box 3. Locking latch
3.
Hold the inner top edge of the cardboard opening,
and pull it off downwards to disengage the outer top
edge of the cardboard opening from the upper hooking
tab on the lip of the dust box.
4.
Take the paper filter out of the dust box while
pulling the outer bottom edge of the cardboard opening
free from the lower hooking tab.
2
1
Fig.26
► 1. Paper filter 2. Cardboard opening 3. Upper hook-
ing tab 4. Lower hooking tab 5. Dust box
2
3
4
5
5.
Replace a paper filter by engaging the bottom
edge of the cardboard opening in the lower hooking
tab and push the top edge inwards until it clips into the
upper hooking tab.
3
1
Fig.27
► 1. Paper filter 2. Cardboard opening 3. Upper hook-
ing tab 4. Lower hooking tab 5. Dust box
6.
Snap the dust nozzle into place while pressing
and holding the locking latches on both sides of the dust
box.
1
Fig.28
► 1. Dust nozzle 2. Dust box 3. Locking latch
12 ENGLISH
3
2
4
2
3
5
3
Publicité
