Setup And Installation - Cameo ROOT PAR TW Manuel D'utilisation

Su (music-triggered lighting sequence)
For bass, the preconfigured color temperature presets in the stand-alone mode Loop under Step 1
and Step 2 change. The control microphone is located on the back of the spotlight; the micro-
phone sensitivity is preset in the stand-alone loop mode.
CM (CCT)
Press CM+ or CM- to start the CCT stand-alone mode. The CM+ and CM- buttons are used to set
the color temperature in 100 K steps from 3100 K to 6500 K in this mode.
Pr+ / Pr- (no function)

SETUP AND INSTALLATION

Thanks to the convenient twin mounting bracket, the spotlight can be placed in a suitable location
on a flat surface. Install on a crossbeam using a traverse clamp that is attached to the mounting
bracket . Suitable traverse clamps are available as needed. Ensure that the connections are
A
tight and secure the spotlight to the fixing eyelet on the back of the spotlight using a suitable
safety eyebolt.
DANGER: Overhead installation requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to carry out the installation yourself; contact a professional company. There is a
risk that incorrectly mounted or secured devices may come loose and fall down. This
may lead to serious injury and even fatalities.
19