Setup And Installation - Cameo OPUS W5 Manuel D'utilisation

SETUP AND INSTALLATION

The integrated plastic feet allow the spotlight to be placed in a suitable position on a level surface.
Install on a crossbeam using an Omega bracket that is attached to the middle of the device base
(A). An Omega bracket is included in the scope of delivery; suitable crossbeam clamps are option-
ally available. Make sure that the spotlight is firmly attached and secure it using a suitable safety
cable on the designated location (B). The laterally attached wing screws are used to adjust the
LED unit's beam direction independently of the device base.
DANGER: Overhead mounting requires extensive experience, including the calculation
of the load limit values of the installation material and regular safety inspection of all
installation materials and spotlights. If you do not have these qualifications, do not
attempt to carry out the installation yourself; contact a professional company. There is a
risk that incorrectly mounted or secured devices may come loose and fall down. This
can seriously injure or kill people.
B
A
A
25