Télécharger Imprimer la page

Maruyama P23 Manuel D'opérateur page 25

Publicité

Les langues disponibles

Les langues disponibles

TroubleShooting
Problem
Engine Will Not Start
Engine Will Not Idle
Engine Lacks Power or Stall
When Cutting
Maintenance Period
Check and replenish fuel
Check for fuel leakage
Check bolts, nuts and screws for tightness or missing
Tighten bolts and nuts
Clean air filter element
Clean spark plug and adjust electrode gap
Remove dust and dirt from cylinder fins
Remove carbon deposits in exhaust port
Clean spark arrester
Replace fuel filter
Remove carbon deposits on piston head and combustion chamber
Remove carbon deposits in transfer ports
Replece fuel tube, fuel tank cap gasket
●: Service to be performed by an authorized Maruyama engine dealer.
■: Service more frequently under dusty conditions.
NOTE:
The service intervals indicated are to be used as a guide.
Service to be performed more frequently as necessary depending on operating condition.
Use Maruyama standard 50:1 two-cycle engine oil.
All manuals and user guides at all-guides.com
Cause
STOP switch set to off position
Empty fuel tank
Primer bulb wasn't pushed enough
Engine flooded
Idle speed set incorrectly
Throttle wire has come loose
Dirty air filter
Clogged spark arrester or exhaust port
Maintenance
― US - 24 ―
Action
Move switch to on position
Fill fuel tank
Press primer bulb until fuel flows
through fuel return line
Use warm engine starting procedure
Set idle speed
Tighten throttle wire
Clean or replace air filter
Clean spark arrester or exhaust port
Every
Every
Daily
20 hours
50 hours
It is recommended to replace every 3
years
Every
100 hours

Publicité

loading

Produits Connexes pour Maruyama P23