Publicité
Les langues disponibles
Les langues disponibles
4.
Click
to measure the distance from the tool to the
wall or object.
5.
Indicate that you want to add this measurement to the
next measurement.
• On the TLM99 keypad, click
• On the TLM99s or TLM99si keypad, click
(Figure
#1).
B
6.
Point the laser at the top of the tool toward the next
wall or object.
7.
Click
to measure the distance and add it to the
previous measurement.
8.
View the total of the two measurements at the bottom
of the display window (Figure
Subtracting Measurements
You can subtract one measurement from another.
1.
Click
(Figure
#5) to turn on the tool.
A
2.
The tool will measure the distance from the bottom of
the tool to the wall or object (Figure
To measure from the top of the tool instead of the
bottom (Figure
#2), hold
F
On the display window, the tool icon will change from
to
(Figure
3.
Point the laser at the top of the tool (Figure
toward the wall or object whose distance you need to
measure.
4.
Click
to measure the distance from the tool to the
wall or object.
5.
Indicate that you want to subtract the next
measurement from this measurement.
• On the TLM99 keypad, click
• On the TLM99s or TLM99si keypad, click
twice.
6.
Point the laser at the top of the tool toward the next
wall or object.
7.
Click
to measure the distance and subtract it from
the previous measurement.
8.
View the difference between the two measurements
at the bottom of the display window (Figure
All manuals and user guides at all-guides.com
(Figure
#7).
A
#3).
E
#1).
F
for 2 seconds.
#5).
E
#1)
A
twice.
#3).
E
Changing the Unit of Measure
Once the current measurement is taken (the device is not
in Continuous Measure mode), you can change the unit of
measure from decimal ft (6.21 ft) to fractional ft (6'02"
fractional ft to meters (1.894 m), meters to inches
(74
in), or inches to decimal ft.
9/16
• On the TLM99 keypad, click
• On the TLM99s or TLM99si keypad, hold
#1) until you see the measurement change (2-3
B
seconds).
Using Your TLM99s/TLM99si With
If you have a TLM99s or TLM99si, you can use its
®
Bluetooth
capability to pair it with the STANLEY Smart
Connect application on your cell phone or tablet, and
then record accurate measurements in your floor plans.
1.
From either
STANLEY Smart Connect application to your cell
phone or tablet.
2.
Using the STANLEY Smart Connect application,
capture the room or space for which you want to
record the measurements, and build your floor plan.
3.
On the TLM99s or TLM99si keypad, click
on the tool.
®
4.
If the Bluetooth
icon does not appear on the display
window (Figure
#6), click
E
®
turn on Bluetooth
.
5.
Use the STANLEY Smart Connect application to pair
your cell phone or tablet to the TLM99s or TLM99si.
6.
Use the TLM99s or TLM99si to measure each wall in
the room or space captured in the floor plan, and sync
the measurements to the floor plan.
7.
Using the STANLEY Smart Connect application,
save the floor plan.
Once you have saved the floor plan, you can export it to
one of several different file formats, including PDF, DXF,
or JPG, and print it or email it to other people (your realtor,
home center, etc.).
"THE BLUETOOTH ® WORD MARK AND LOGOS ARE REGIS-
TERED TRADEMARKS OWNED BY BLUETOOTH SIG, INC. AND
ANY USE OF SUCH MARKS BY STANLEY TOOLS IS UNDER
LICENSE. OTHER TRADEMARKS AND TRADE NAMES ARE
THOSE OF THEIR RESPECTIVE OWNERS."
9/16
(Figure
#3).
A
(Figure
or
, download the
to turn
on the keypad to
E
),
7
Publicité
