Technical Precautions - Aiphone JK-1MED Manuel D'installation Et D'utilisation

8-14 Erase recorded picture
It is also possible to erase saved recorded pictures.
The erasure of recorded images is performed for each image in turn.
1
Display the picture that you want to erase in the play-waiting screen.
(Refer to section 8-13)
Press MENU button ( ) to display the save/erase selection screen.
NOTES: When there are multiple recorded pictures, the next (older date)
picture displays when erasing is completed.
8-15 If optional units are installed
8-15-1
(without notification at door)
1
When a separately-installed sensor is activated or call button is pressed, the
alarm sound occurs and the transmit LED (red) flashes. A warning screen is
displayed on the video monitor.
2
Press OFF button to stop the alarm sound.
1. Even if the chime tone volume is set to 0 (OFF), it will sound at a level
equivalent to 10 (HIGH).
2. The warning screen will not display on the sub monitor station.
NOTES: 1. The alarm sound time is set in the external input settings. (Refer to section 7-5) The factory setting is
2. When notification at door is set, an alarm sound is emitted from the door station. (The factory setting is to be disabled.)
3. If there is a call from the entrance or another inside unit during notification, the system switches to the entrance or other inside unit (communication is
prioritized). ※ Only when notification at door is disabled.
4. When the alarm sound time is set at
5. When the alarm sound time is set at
however, goes out after approximately 10 min.
9

TECHNICAL PRECAUTIONS

• Operating temperature: 0 ° C to 40 ° C (+32 ° F to +104 ° F)
• The video image may distort when the door release is activated. But this is not
a unit malfunction.
• Cleaning: Clean the units with a soft cloth dampened with a neutral household
cleanser. Do not use any abrasive cleaner or cloth.
10
SPECIFICATIONS
• Power:
DC 18 V
• Current consumption: (MAX) 400 mA
• Calling:
Chime and image, approximately 45 seconds
• Communication:
<HANDS-FREE mode> Hands-free: 1, 2, 3 or 5 min.
<PTT mode> Press-to-talk, release to listen: 1, 2, 3 or 5
min.
• Video monitor:
3-1/2" direct view TFT color LCD
JAN/01/2009 18:45
, automatic restoration occurs after 30 seconds.
DISABLE 30SEC
DISABLE CONT. or ENABLE CONT.
2
Press the MENU button (
screen.
Press MENU button (
Press REC button (
Once a picture is erased, it cannot be restored.
8-15-2
(with notification at door)
1
When a separately-installed sensor is activated or call button is pressed, the
alarm sound occurs and the transmit LED (red) flashes. A warning screen
is displayed on the video monitor. Also, the door station alarm sound also
sounds and the Illuminator LED flashes.
DISABLE 30SEC
, the alarm sound will continue until it is stopped. The monitor warning screen,
• If there is a system malfunction, turn the POWER switch at the monitor station
OFF and back ON again. If this does not solve the problem, unplug the DC
power supply and contact a qualified technician for service.
• Scanning lines:
525 lines
• Door release contact:
AC/DC 24 V, 0.5 A (N/O dry closure contact L, L)
(Minimum Contact : 100 mV DC, 0.1 mA)
(Aiphone's EL-12S is recommended.)
• Dimensions:
185 (H) x 135 (W) x 27 (D) (mm)
7-5/16 (H) x 5-5/16 (W) x 1-1/16 (D) (inches)
• Weight:
Approximately 390 g (0.82 lbs.)
- 17 -
) again to display the erase selection
) to erase.
) to stop erasing.
JAN/01/2009 18:45
.