Télécharger Imprimer la page

Elica SPOT PLUS ISLAND IX/A/90 Prescriptions De Montage Et Mode D'emploi page 20

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 27
CLOCK
To set the clock:
- press button 3 until moving the indicator(b) on function
"CLOCK"
- press button 4 to access clock setting
- keep button 4 pressed:
• keeping it pressed for one second increases the time by
one minute
• after 10 seconds, each second it is pressed increases the
time by 10 minutes
To store the set time:
- press button 3
TIMER
Stopwatch Function
- press button 3 until moving the indicator(b) on the "TIMER"
function
- press button 4 to access timer setting
- to start the stopwatch: simultaneously press button 3 and
button 4, for 5 seconds
- to stop the stopwatch: simultaneously press button 3 and
button 4, for 5 seconds
Note= after 60 minutes the stopwatch stops automatically
"Countdown" Function
- press button 3 until moving the indicator(b) on the "TIMER"
function
- press button 4 to access timer setting
To set the "Countdown" timer:
- keep button 4 pressed:
• keeping it pressed for one second increases the timer by
one minute
• after 10 seconds, each second it is pressed increases the
timer by 5 minutes
To save the "Countdown" timer
- press button 3
The Timer indicator(b) will start flashing to indicate the
start of the "Countdown"
When the "Countdown" reaches "0:00" the motor is
switched off
Note = to set a new timer, button 4 must be pressed until the
indication "0:00" is displayed again
Note = the maximum countdown setting time is 60 minutes
GREASE FILTER
Display percentage of utilisation:
- press button 3 until moving the indicator(b) on the "GREASE
FILTER" function
- press button 4 to display the percentage of utilisation of the
grease filter
Grease filter reset warning
The grease filter warning is displayed after 40 hours of
utilisation with the wording "RESET"(e) next to the "GREASE
FILTER" function
All manuals and user guides at all-guides.com
When this warning is displayed the grease filter must be
washed.
After performing maintenance:
- press button 3 until moving the indicator(b) on the "GREASE
FILTER" function
- press button 4, for 5 seconds, to disable the warning and
restart the grease filter efficiency percentage counting.
ODOUR FILTER
Display percentage of utilisation:
- press button 3 until moving the indicator(b) on the "ODOUR
FILTER" function
- press button 4 to display the percentage of utilisation of the
carbon anti-odour filter
Carbon anti-odour filter reset warning
The carbon anti-odour filter warning is displayed after 160
hours of utilisation with the wording "RESET"(f) next to the
"ODOUR FILTER" function
When this warning is displayed the carbon anti-odour filter
must be washed or replaced (depending on the model you
have)
After performing maintenance:
- press button 3 until moving the indicator(b) on the "ODOUR
FILTER" function
- press button 4, for 5 seconds, to disable the warning and
restart the carbon anti-odour filter efficiency percentage
counting.
NB= The anti-odour carbon filter function is disabled by
default
-to enable the anti-odour carbon filter signal, please
follow these steps: with the cooker hood turned off,
simultaneously press buttons 3 and 4 for 5 seconds; the
words "ODOUR FILTER" will appear on the display, indicating
that the signal is on. Repeat the same procedure to disable it.
19

Publicité

loading