Publicité
Les langues disponibles
Les langues disponibles
EN
FUNC5
FUNC6
FUNC7
FUNC8
FUNC9
1. Select the Setup Menus with the help of Function Codes：
Format：FUNC <Function Code>
After "Enter", the Setup Menu for the Function Code will be called.
The <Function Code>= 0~18
2. Command to query the Functions No：
Format：FUNC?
After "Enter", the unit's "Function Code" appears on the PC screen.
3. Command to query the set value of the Function：
Format：SETT?
After "Enter", the existing set value of the function appears on the PC
screen.
4. Command to set or adjust the value of the Function：
Format：SETT <value>
After "Enter", the new value of the Function is set Choose the <value> of the
function.
6-1-4. Setting interface
1. OVP Setting <FUNC0>：Set the Over Voltage Protection (OVP) and
shutdown.
Default = 16 VDC @ 12V Model, 32 VDC @ 24V Model, 64 VDC @ 48V
Model
Model
2. OVP Recovery <FUNC1>：When the DC input voltage is higher than the OVP
setting, the ECB-series shuts-down; once the input voltage falls below the
set OVP value, the ECB-series will automatically restart.
Default = 15 VDC @ 12V Model, 30 VDC @ 24V Model, 60 VDC @ 48V
Model
Model
38
All manuals and user guides at all-guides.com
O/P Voltage
RS-232 Baud rate
O/P Frequency
Sync Frequency
Overload Alarm
Table 28. Command for accessing setup menus and adjusting values
Setting value range
12 V
15 VDC ~ 16 VDC
24 V
30 VDC ~ 32 VDC
48 V
60 VDC ~ 64 VDC
Table 29. OVP Setting <FUNC0>
Setting value range
12 V
13 VDC ~ 15 VDC
FUNC15
LCD Auto-off
FUNC16
Buzzer Setting
FUNC17
Alert Setting
FUNC18
Language
Publicité
