EZA ECB Serie Mode D'emploi page 29

Note
The simple method to determine the terminal resistor：No need to set the
terminal resistor when CAN1 and CAN2 have wiring.
Note
ECB series can be used for N+1 (N≦14) redundancy and the ability of
enlarge the capacity (Users can install maximum 15 units of inverters
together in parallel in order to provide the power expansion).
3. Before using the parallel function, you need to set voltage and frequency of all
units' DIP switches to the same selection (refer to section 3-3).
4. Check RJ-45 line connects already.
5. ECB series based on master-slave architecture and support auto master
function. User only set one ECB parameters and other ECBs will follow the
master ECB setting.
5-2. Industry Applications
1Φ2W
Type
Drawing
Example：
ECB25-124 set output 100V /
50Hz
Example
The L-N：100V / 50Hz
All manuals and user guides at all-guides.com
The ECB series create 1Ф3W
power system, L1-L2 Voltage
is L1-N double.
Example：
ECB25-124 set output 100V /
50Hz
The L1-N：100V / 50Hz
1Φ3W
Example：
ECB25-124 set output 100V /
50Hz
The phase voltage is 100V /
50Hz (L1-N, L2-N, L3-N)
The line voltage ： L1-L2, L1-L3,
L2-L3 ~ 173V/50Hz
3Φ4W
27