Publicité
Les langues disponibles
Les langues disponibles
EN
1
Power ON/OFF/REMOTE (Main) switch
2
Status LED
3
Dip Switch (S1~S8)
4
DC Input -
5
DC Input +
6
Chassis Ground
7
AC Output
8
By-pass AC Input
9
AC input circuit breaker
3-1. Power ON / OFF / REMOTE (Main) switch
A. Before installing the inverter, please ensure the main switch is in the OFF position.
B. Before using the remote unit, please ensure the main switch is in the REMOTE
position.
C. Main switch ON / OFF will not control AC Grid input, therefore for any
maintenances please remove the AC Grid connection to prevent damage of ECB
series, then turn off the Main switch to OFF position for maintenance service.
3-2. LED Indicator
Green LED
Solid
Slow Blink
Intermittent Blink
Orange LED
Fast Blink
Slow Blink
Red LED
Intermittent Blink
Fast Blink
Slow Blink
Solid
Intermittent Blink
Intermittent Blink
12
All manuals and user guides at all-guides.com
Front Panel / Rear Panel
10
AC output socket
11
Reset Button
12
CAN2 Port (only to be used in parallel mode)
13
CAN1 Port (only to be used in parallel mode)
LCM Port (Connection for LCD remote control
14
panel)
15
Green terminal (Remote and Parallel select)
16
Remote / RS-232 port
17
FAN
Table 3. ECB front panel / rear panel introduction
LED Signal
LED Signal
LED Signal
Table 4. ECB LED indicator
Status
Power OK
Power Saving
Bypass
Status
OVP
UVP
Status
OTP
OVP- Shut-down
UVP- Shut-down
OLP
Fan Failure
Component Failure
Publicité
