Dexter HCM450B Mentions Légales & Consignes De Sécurité page 154

5. OPERATION
Do not pour or spray water directly over the motor cover, especially
the openings in it.
Wipe off any external material on the motor cover. Do not use petrol,
turpentine, lacquer or paint thinner, dry cleaning fluids or similar
products. The use of chemical products or solvents may affect the properties
of the cover which was made of high density polyethyiene PET.
6. MAINTENANCE
Ensure the extension cord is always unplugged before the motor
cover is removed.
• The drive belt is under constant even tension by a spring loaded jockey. No adjustment apart
from a touch of grease on the spindle.
• The bearings are sealed for life.
The wiring diagram and parts schematic in this manual are as
reference tools only. Neither the manufacturer nor distributor makes
any representation or warranty of any kind to the buyer that he or she is
qualified to make any repairs to the product or that he or she is qualified
to replace any parts of the product. Only qualified technicians should repair
the mixer. Any maintenance and repairs carried out, to any of the electric
components must be undertaken by a qualified electrician.
Parts in a circle should only be fitted by a qualified electrician.
EN
154