Dexter HCM450B Mentions Légales & Consignes De Sécurité page 152

5. OPERATION
Transporting
A
1
• Folding/ Unfolding: Remove the bolts showed on the picture ,loosen nut A, then fold the
support leg; loosen nut B, then fold the axle bracket.
• Follow the opposite steps to make the mixer stand.
Height Adjusting
• Height adjusting: Remove the bolts showed on the picture, adjust the support leg and axle
bracket to different height position, then tighten the bolts.
EN
B
2
Top Position
Higher Position
Default Possition
Lower Position
Bottom Position
152