Publicité
Smocking
Machine setting
364344 45
_i_ Pattern
}}_
_2_LED display
_3_Foot
F: Satin stitch foot
Set the thread tension dial at 1-3, and stitch length at
3-4, sew straight lines 1 cm (3/8") apart across the
area to be smocked.
Knot the needle and bobbin threads along one edge _2_.
Pull the bobbin threads _3_and distribute gathers
evenly.
Sew lines of the decorative pattern between the
straight seams. Pull out the gathering stitches.
_i_ 1 cm (3/8")
.............
36 43 44 45
1
Fagoting
Machine setting
_i_ Pattern
_2_LED dis
_3_Foot
Fold under 1
press. Pin
(1/8") apart.
Sew guiding the
folded edge on each side.
Peel off the paper from fabrics.
edge and
paper 0.3 cm
catches the
Cross
Stitch
Machine setting
49
_i_ Pattern
X
_2_LED display
x
_3_Foot
F: Satin stitch foot
You can make beautiful designs with this embroidery
stitch pattern, in half the time it would take if
embroidered
by hand.
• Starting
to sew
Choose a plain close weave fabric such as linen or
wool flannel for the background fabric. If you choose
light weight fabric, use a tear away backing for
support.
Adjust the stitch width as you desire to match the
pattern.
Sew outward from the center of the design.
Use the placement arrow "A" on the foot F to insure
straight, even rows.
49
X
X
1
Publicité
