Publicité
Les langues disponibles
Les langues disponibles
Chapter II
1.1.3 Symbols
WEEE 2002/96/EC directive
Refer to the user's manual
Risk of electric shock
Double insulation
1.1.4 Instructions
• Before opening the instrument, disconnect it from the circuits to be
measured and make sure that you are not charged with static electricity,
which could irreparably damage the instrument's internal elements.
1.1.5 Cleaning
Disconnect external circuit leads and turn the instrument off. Clean with a
damp cloth and soap. Never use abrasive products or solvents.
Make sure the instrument is perfectly dry before using it again.
1.1.6 Protection factor (PF)/Humid environment
This instrument has a PF67 protection factor, which means that it is
extremely waterproof and will not be damaged by water immersion (when
turned off). However, the instrument and its accessories must be completely
dry (including inside measurement terminals) before being used again.
1.2
Guarantee
This equipment is guaranteed against any material or manufacturing flaws,
as specified in the general terms of sale.
During the guarantee period (1 year), the instrument can only be repaired by
the manufacturer, who reserves the right to repair the instrument or to
exchange all or part of it. If the equipment is returned to the manufacturer,
the outgoing transport costs are borne by the customer.
The guarantee is not applicable in the following cases:
1.
improper use of the equipment or use in conjunction with incompatible
equipment;
2.
modifications to the equipment without the explicit authorisation of the
manufacturer's technical department;
3.
work carried out on the instrument by a person not approved by the
manufacturer;
4.
adaptation for a specific application, not included in user's manual
5.
knocks, falls or prolonged immersion.
DMM220
19
Publicité
