Danby DFF143V1SSDB Manuel Du Propriétaire page 8

OPERATING INSTRUCTIONS
DOOR REVERSAL INSTRUCTIONS
If the appliance is placed on its back or side during this process it
must be allowed to stand upright for 6 hours before plugging in to
avoid damage to internal components.
1. Remove the screw hole cover from the top left side of the cabinet.
Remove the upper hinge cover and the upper hinge from the
top right side of the cabinet. Remove the freezer door from the
cabinet.
2. Remove the hinge pin from the upper hinge. Flip the upper hinge
over. Reinstall the hinge pin on the opposite side of the hinge.
3. Remove the center hinge from the cabinet. Remove the
refrigerator door from the cabinet.
4. Move the hinge hole sleeve from the top right side of the
refrigerator door to the top left side of the refrigerator door. Move
the hinge hole cover from the top left side of the refrigerator door
to the top right side of the refrigerator door.
5. Move the screw hole covers from the center left side of the
cabinet to the center right side of the cabinet.
6. Remove both adjustable feet from the bottom of the cabinet.
Remove the lower hinge from the bottom right side of the
cabinet.
7. Move the adjustable foot from the right side of the hinge to the
left side of the hinge.
8. Install both of the adjustable feet on the bottom of the cabinet .
9. Install the refrigerator door on the cabinet. Flip the center hinge
and install it on the center left side of the cabinet.
10. Move freezer door hinge from right side to left side. Move hole
plug from left side to right side. Install the freezer door on the
cabinet. Install upper hinge hinge cover on the top left side of the
cabinet. Install the screw hole cover on the top right side of the
cabinet.
7