Matrix MAGNUM Serie Mode D'emploi page 5

ASSEMBLY
UNPACKING
Thank you for purchasing a MATRIX Fitness product. It is inspected before it is
packaged. It is shipped in multiple pieces to facilitate the compact packaging of the
machine. Prior to assembly, confirm all the components by matching them with
the exploded diagrams. Carefully unpack the unit from this box and dispose of
the packing materials in accordance with your local laws. Exercise device must be
assembled by a trained assembly team or be pre-assembled prior to delivery.
CAUTION
To avoid injury to yourself and prevent damage to the frame components,
be sure to have proper assistance removing the frame pieces from this box.
Please be sure to install the equipment on a stable base, and properly level the
machine. Ensure a minimum clearance width of 0.6 meters (24") for access to
and passage around MATRIX strength equipment. Please note, 0.91 meters (36")
is the ADA recommended clearance width for individuals in wheelchairs.
TOOLS REQUIRED FOR ASSEMBLY (not included)
3MM L-Shaped Allen Wrench
4MM L-Shaped Allen Wrench
5MM L-Shaped Allen Wrench
6MM L-Shaped Allen Wrench
8MM L-Shaped Allen Wrench
If any items are missing please contact your country's local MATRIX dealer for assistance.
0 10 20 30 40 50
mm
ENGLISH
FREE AREA
0.6 (2
M
WIDE PATH
10MM L-Shaped Allen Wrench
12MM L-Shaped Allen Wrench
Phillips Screwdriver
8MM Open-End Wrench
19MM Open-End Wrench
60 70 80 90 100 110
5
TRAINING AREA
1.68 M
(66.2")
)
FT
120 130
1.32 M
(52.2")