Eco-Aire 2400 Manuel D'utilisation page 5

Heating Specifications
Heat Output 1
Heating Capacity 2
Fuel Burn Rate
3
Burn Time (lowest setting)
Hopper Capacity
Dimensions
Height
Width
Depth
Weight
Window / Cut-Out Dimensions
Minimum Cut-out / Window Opening
inches [milimeters]
Electrical Specifications
Electrical Rating
Watts (operational)
Watts (igniter running)
FUEL CONSIDERATIONS
Your Pellet heater is designed to burn certified
Premium Hardwood pellets that comply with
Association of Pellet Fuel Industries standards. Pellets
that are soft, contain excessive amounts of loose
sawdust, have been, or are wet, will result in reduced
performance. Failure to use proper fuel can affect
the longevity of the appliance. Smaller pellets could
affect feed rates. Store your pellets in a dry area and
well away from the heater.
SAFETY AND COMPLIANCE
Your Pellet heater has been safety tested and listed to ASTM E 1509-04 and ULC S627-00, by Intertek Testing
Services in Portland, Oregon, USA.
Ussc
All manuals and user guides at all-guides.com
Specifications
16,400 BTU/hr.
500 - 1,000 sq. ft.
¾ - 2½ lbs./hr.
approx. 35-40 hrs.
approx. 30 lbs.
21⅜ in. [543mm]
22½ in. [572mm]
27⅛ in. [689mm]
126½ lbs. [57.5kg]
14" x 22¾"
[356 x 578]
⅞
24 [632]
⅜
12 [314]
¾
13 [349]
4 [102]
½
5 [140]
110-120 volts, 60 HZ, 3.0 Amps
175 (approx.)
425 (approx.)
BTU output will vary depending on the quality of fuel. Use
1
PFI listed fuels for the best results.
2 Heating capacity will vary depending on floor plan
layout of your home, degree of insulation, and the outside
temperature.
Pellet size may effect the actual rate of fuel feed and burn
3
times. Fuel feed rates may vary by as much as 20%. Use PFI
listed fuel for best results.
½
12 [318]
Pellet Fuel Institute (PFI) Premium Standards
Min. Density 40 lbs. per cubic ft.
¼ /
Size 5
" to
16
Heat Output 8,200 BTU/lb
Moisture Content 8% by weight or less
Ash Content 1% by weight
Salt Content 300 parts per million or less
½
22 [572]
⅞
22 [581]
21
[543]
" diameter, length no greater than 1
⅜
½
"
5