The Dimensions For Swimming Pool Heat Pump Unit; Installation And Connection; Installation Illustration - Norsup 7026965 Notice Originale

SWIMMING POOL HEAT PUMP TYPE PV

2.2 THE DIMENSIONS FOR SWIMMING POOL HEAT PUMP UNIT

UNIT: P13V/32 /P17V/32
UNIT: P21V/32 /P21TV/32/P24V/32 /P24TV/32
UNIT: P31V/32 /P31TV/32/P35V/32/P35TV/32
12 WWW.NORSUP.EU
Unit mm
Unit mm
Unit mm
Alterations which serve the technological progress as well as errors excepted!
SWIMMING POOL HEAT PUMP TYPE PV
3.

INSTALLATION AND CONNECTION

3.1

INSTALLATION ILLUSTRATION

Installation items
The factory only provides the main unit and the water
unit; the other items in the illustration are necessary
spare parts for the water system, that provided by
users or the installer.
ATTENTION
Please follow these steps when using
for the first time
1. Open valve and charge water.
2. Make sure that the pump and the water-in
pipe have been filled with water.
3. Close the valve and start the unit.
Attention
It is necessary that the water-in pipe is higher
than the pool surface.
The schematic diagram is for reference only. Please
check the water inlet/outlet label on the heat pump
while plumbing installation.
The controller is mounted on the wall.
Alterations which serve the technological progress as well as errors excepted!
EN DE
EN NL
DE
FR
DK
SE
ORIGINAL MANUAL NORSUP 13