NUK ECO Control+ Manuel D'instructions page 43

Sound alert indicator
The
flash when the sound alert function is triggered.
5.6 ViBratiOn alert
If the vibration alert function is set to ON and when the loudspeaker volume of par-
ent unit is switched to OFF, the parent unit will vibrate when the noise level from the
baby unit reaches the level at which the visual LEDs 3, 4 and 5 are activated.
Enabling/disabling vibration alert
2x
Vibration alert indicator
The
will flash when the vibration alert function is triggered.
This function can be used in combination with the sound alert function.
5.7 lullaBies
This Babyphone comes complete with five different lullabies.
Starting/stopping lullabies
Lullaby indicator
The
Selecting lullabies from the p arent unit
NUK Babyphone 10.256.267 (BM-200).indb 37
All manuals and user guides at all-guides.com
icon will be displayed when the sound alert function is enabled, and will
Press the menu button (Fig. 15).
Select the [ VIBRATION ] option.
Press the MENU button twice. If the alert is currently OFF, it will now
be set to ON; if the alert is currently ON, it will now be set to OFF.
Briefly press the POWER button to close the programming mode.
icon will be displayed when the vibration alert function is enabled, and
Press the button to start playback (Fig. 16).
Press the button again to stop playback.
(you can also press the
icon will be displayed when the baby unit is playing lullabies.
Press the menu button.
Select the [ LULLABy ] option.
Press the menu button.
Select the desired lullaby (from the selection of 5).
button on the baby unit to start playback)
37
17.12.2009 14:09:58