Troubleshooting; Malfunctions - Bosch KUR Série Manuel D'utilisation

Troubleshooting

Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshoot-
Troubleshooting
ing information before contacting after-sales service. This will avoid unneces-
sary costs.
WARNING
Risk of electric shock!
Incorrect repairs are dangerous.
Repairs to the appliance should only be carried out by trained specialist
▶
staff.
Only use genuine spare parts when repairing the appliance.
▶
If the power cord of this appliance is damaged, it must be replaced by the
▶
manufacturer, the manufacturer's Customer Service or a similarly qualified
person in order to prevent any risk.

Malfunctions

Fault
The LED lighting does not
work.
The base of the refrigerator
compartment is wet.
Cause
The illuminant is defective.
The light switch is jammed.
The condensation channel
or drainage hole are
blocked.
Troubleshooting en
Troubleshooting
"Switch off the appliance."
1.
→ Page 31
Disconnect the appliance from the
2.
mains.
Unplug the appliance from the
mains or switch off the circuit
breaker in the fuse box.
Remove the illuminant cover to the
3.
left.
→ Fig.
10
Replace the illuminant.
4.
Replacement illuminant: 220–240
V AC, E14 bulb holder, see the de-
fective illuminant's wattage.
Check whether the light switch can
▶
be moved.
→ Fig.
11
"Clean the condensation channel
▶
and the drainage hole." → Page 33
35