Publicité
Les langues disponibles
Les langues disponibles
P
C
I C T U R E
O N T R O L
Selecting a Signal Source (External A/V) for PIP
3
Press the UP/DOWN
buttons to select "Source",
then press the ENTER
button.
Select the source of the sub
picture (PIP) by pressing the
UP/DOWN
buttons and
press the ENTER
button.
Swapping the Contents of the PIP and Main image
4
Press the UP/DOWN
buttons to select "Swap",
then press the ENTER
button.
Alternate method:
Press the SWAP button under the remote's cover.
Changing the PIP Channel
5
Press the UP/DOWN
buttons to select "Channel",
then press the ENTER
button.
Press the UP/DOWN
buttons to select the desired
channel in the PIP window.
Continued...
[PC/HDMI modes only]
[PC/HDMI modes only]
41
English-
When the main picture is set to TV/
AV1/AV2/S-Video/Component1/
Component2, only HDMI can be
selected and when the main picture
is set to PC/HDMI, only TV/AV1/
AV2/S-Video/Component1/
Component2 can be selected.
Source selection is possible only
when PC or HDMI is connected.
If main picture is in PC Mode,
"Swap" is not available.
Publicité
