Publicité
Two people
required for
this step.
Fig. 13
13. Do not glue dowels.
Place the Upper Bunk Bed on top of the Lower Bunk Bed so that the dowels insert into the holes
in the bottoms of each leg. See Figure 13.
L
Q
M
Fig. 14
14. Using the Hex Wrench (S), insert eight 6x50mm Black Hex Screws into the holes in the Upper and
Lower Headboard legs as shown in Figure 14. Align the rail assemblies so that the rail ends are
parallel to each other. Using the Hex Wrench (S), tighten the 6x35mm Black Hex Bolts (L) and the
6x45mm Black Hex Bolts (Q) on both safety rail assemblies.
All manuals and user guides at all-guides.com
L
M
Q
M
M
M
4663AFDH – Page 10 – 02/09
x 8
Publicité
