Publicité

Les langues disponibles

Les langues disponibles

Assembly Instructions
74Wb
Bistro Chair
77Wb
Hawthorne Chair
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Finishing Hints before you begin your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.
82Wb
Provence Chair
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • Email: info@whittierwood.com
Fax: 541-687-2060 • Email: info@whittierwood.com
F F a a x: x: 5 5 4 4 1 1 - - 6 6 8 8 7 7 - - 2 2 0 0 6 6 0 •
0 • www
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Read both the Assembly Instructions and Finishing
Hints completely before beginning.
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any
www. . w w h h i i t t t t ie ier r w w oo
ood d . . c c om
om
Rev. 02/08

Publicité

Table des Matières
loading

Sommaire des Matières pour Whittier Wood Furniture Bistro Chair 74Wb

  • Page 1 Assembly Instructions 74Wb Bistro Chair Service Policy: We will replace any parts which are defective, missing or damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Page 2 74Wb, 77Wb & 82Wb — Parts List (Instructions shown for 74Wb) Before beginning assembly, check that the quantities of the parts received match those on the parts list below. Part W— Front Leg Assembly — Qty. 1 J — Seat — Qty. 1 Part V—...
  • Page 3: Tools Required

    74Wb Bistro, 77Wb Hawthrone & 82Wb Provence chairs ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Head Screwdriver, Wood Glue, Rubber Mallet or Padded Hammer. IMPORTANT: READ GLUING HINTS BEFORE ASSEMBLING! Angled end of side stretcher. FIG. 1 1) Glue the Side Aprons (Ha) to the Back Leg Assembly (V). The square end of the aprons must be toward the front and the angled end must match the angle on the Back Leg Assembly.
  • Page 4 Insert #8 x 1¼" Pan Head Screws (O) through pocket holes in side aprons (Ha) into Front and Back Leg Assemblies (W & V). Lay the Seat (J) face down on a clean protected surface, with the back of the seat hanging over the edge. Center the leg assembly on the seat and making sure that the seat remains in contact with the back legs, fasten in place with 2¾"...
  • Page 5 Finishing Hints Choosing the Finish: Basic Choose a finish that will meet your expectations for the product you are Equipment: finishing. Are you matching existing furniture or do you want a “natural” finish? Is the piece to be functional, decorative or both? The answers to Rubber gloves these questions may affect the type of finish you choose.
  • Page 6 Gluing Hints (cont.) We recommend that you use a good wood glue, such as Elmer’s Wood Glue or White Glue, Titebond Wood Glue or the equivalent; unless the instructions call for a special type such as a slow drying epoxy glue.
  • Page 7 Instrucciones para Armar 74Wb Bistro Silla Normas para obtener servicio: Reemplaza- remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Page 8: Lista De Piezas

    74Wb y 77Wb y 82Wb (Todas las ilustraciones muestran la 74Wb Sillo Bistro) LISTA DE PIEZAS Antes de comenzar a armar la silla, verifique que las cantidades de piezas que ha recibido corresponden a las de la lista de piezas más abajo. Cant.
  • Page 9 1. Elija un acabado que cumpla con las expectativas para el producto a ser acabado. ¿Debe hacer juego con otros muebles o se desea un acabado “natural”? ¿Ha de Guantes de caucho ser funcional, decorativo o ambas cosas? Las respuestas a estas preguntas pueden Trapos afectar el tipo de acabado que se seleccione.
  • Page 10 Ayudas Para el Pegamento: (cont.) 3. Recomendamos que utilice una buen pegamento de carpintero, como Elmer’s Wood Glue o White Glue, Titebond Wood Glue o su equivalente. Lea el rótulo del fabricante cuidadosamente y siga todas las instruc- ciones. 4. Asegúrese de que los agujeros estén libres de polvo para que el pegamento tenga una superficie limpia a la cual adherirse.
  • Page 11 Instructions de Montage 74Wb Bistro Politique de service : Chaise Nous remplacerons toutes les pièces défectueuses, manquantes ou endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement. Horaires : Le personnel accueillant de notre service clientèle est joignable du lundi au vendredi, de 7 h...
  • Page 12: Nomenclature Des Pièces

    74Wb & 77Wb & 82Wb (74Wb Chaise Bistro illustré dans tous les dessins.) NOMENCLATURE DES PIÈCES Avant de commencer le montage, assurez-vous que les quantities de pièces reçuse correspondent à celles de la nomenclature des pièces figurant ci-dessous. Qté Qté Assemblage des pieds arrière ........
  • Page 13 1. Choisissez un enduit de finition qui réponde à ce que vous attendez du meuble. Souhaitez-vous l’harmoniser à votre mobilier actuel ou voulez-vous un aspect naturel ? Le meuble est-il destiné à être fonctionnel, décoratif ou les deux ? Le type Gants en d’enduit de finition que vous choisissez dépend des réponses à...
  • Page 14 Conseils de Finition (suite) 3. Nous vous recommandons d’utiliser une bonne colle à bois, par exemple Elmer’s Wood Glue ou White Glue, Titebond Wood Glue ou équivalent, sauf si les instructions préconisent un type spécial de colle, par exemple une colle époxyde à durcissement lent. Lisez attentivement l’étiquette du fabricant et suivez toutes les instruc- tions.

Ce manuel est également adapté pour:

Hawthorne chair 77wbProvence chair 82wb

Table des Matières