Wolf Garten 2.34 E Notice D'instruction D'origine page 13

1
Attention!
An unbalance can develop after regrinding of the blade.
z Always regrind the blades in a specialist workshop,
because an unbalance check should be undertaken
according to the safety regulations.
z Always change blades in a specialist workshop. A torque
spanner of 10 mm is mandatorily required.
Fastening torque of the screws: 6-7 N-m
Spare parts
Item number
4909 031
4917 031
4904 096
4907 096
Faults and how to remedy
Problem
Uneven running, heavy
vibrations in the mower
Motor will not run
Poor mowing-/ catching
When in doubt, always consult a WOLF-Garten service workshop.
Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.
Warranty
The warranty rules issued by our company or the importer apply
to every country. As part of the warranty, we remedy malfunctions
on your appliance free of charge provided that this malfunction is
caused by a material or manufacturing defect. In the event of a
warranty claim, please turn to your dealer or the nearest branch
office.
G
All manuals and user guides at all-guides.com
S .
Order description
Vi 34 FM
Vi 37 FM
Possible cause
• Blades damaged
• Blades loose in the fastening parts
• Fuse blown
• Cable damaged:
1
Attention! Electric shock through cable damage
When the cable is cut through or damaged, the
safety fuse doesn't always trip.
z Do not touch cable, before pulling out the power
plug from the socket.
z Damaged cable has to be completely replaced.
Patching cable with insulating tape is forbidden.
• Blunt blades
• Catcher bag blocked
• Incorrect cutting height
Product information
Grass catcher (34)
Grass catcher (37)
Replacement blade 34 cm
Replacement blade 37 cm
Remedy (X) by:
WOLF-Garten
Yourself
service-workshop
X
---
---
X
X
---
---
---
X
X
---
---
X
X
13