Tripp-Lite U205-004-R Mode D'emploi page 2

Introduction
The Universal Serial Bus (USB) hub, is a USB cable concentrator
and a bridge between PC USB Host Controller and up to 4 USB
devices. It is a full speed USB hub, and supports both full speed
(12Mbps) and low speed (1.5Mbps) devices. This HUB can
function in either a Self-powered and Bus-powered modes and
has per-port overcurrent protection.
System Requirements
l
Windows® 98, Windows® 2000
l
Mac OS 8.6 & up
l
OS/2 Warp (with USB driver installed)
l
Your PC must have USB Host controllers inside the H/W
system
Features
l
Provides four downstream ports.
l
Both Bus-powered mode and Self-powered mode are
supported, switches automatically when adapter connected.
l
Per-port overcurrent detection and protection.
l
Per-port power ready/overcurrent LED indicators.
l
A real Plug & Play and Hot-plugged device.
Get user manuals: See SafeManuals.com
2