Publicité
Les langues disponibles
Les langues disponibles
Installation and Operating Instructions
CHAPTER 7
OPERATING
OPTIONS
CHAPTER 8
SOFTWARE
easyControls 3.0
Central ventilation unit – KWL 500 W/W ET
7.1
Local web server
The unit can be configured via the local web server using a web browser, via a mobile end device (e.g. notebook, PC,
tablet, smartphone). A unit login/registration is not required.
Set up local web server:
1. Connect unit to the router or directly to a notebook/PC via an Ethernet cable RJ45 (not included in delivery).
2. Open desktop and click on Network, cf. Fig. 34.
3. Double-click on the corresponding unit, cf. Fig. 34.
> The easyControls 3.0 controls open automatically via the web server in the web browser.
4. Configure unit settings, see chapter 8.1 „Menu overview", page 22.
ⓘ In order to operate the unit, the commissioning assistant must be complete, see chapter 6.2 „Run commissio-
ning assistant", page 15.
7.2
easyControls cloud service
Authorised users, service technicians or housing association can change external unit settings or call up status informa-
tion via the easyControls cloud service at any time.
Logging on with a username and password is required for using the easyControls cloud service.
ⓘ The KWL
unit must be connected to the internet.
®
7.3
Control elements
The operating or control options for the KWL
(accessories) or the comfort control element KWL-BE Touch (accessories).
The installation, commissioning and detailed functional description can be found in the installation and operating inst-
ructions for the corresponding control element.
7.4
Building control system
The KWL
unit can be integrated in a building control system network via the standard Modbus interface (RS 485) or an
®
optionally available KNX module KWL-KNX Connect (accessories).
ⓘ The associated operating instructions "KWL
www.HeliosSelect.de in the corresponding article.
8.1
Menu overview
easyControls 3.0 is the software for the smart and comfortable operation of the KWL
Settings can be configured in the following areas:
• Homepage (see chapter 8.2 „Homepage", page 22)
• Unit data (see chapter 8.3 „Unit data", page 24)
• Service menu (see chapter 8.4 „Service menu", page 24)
• Settings (see chapter 8.5 „Settings", page 25)
• Configuration (see chapter 8.6 „Configuration", page 25)
8.2
Homepage
8.2.1 Ventilation profiles
4 ventilation profiles can be selected or configured.
The ventilation profiles can be expanded via the
profiles can be selected for use.
ⓘ Sensors are only displayed if they are connected.
ⓘ The ventilation profile with the red background is always active .
Fig. 34
unit can be extended via the slide switch control element KWL-BE Eco
®
®
easyControls Modbus" can be downloaded on HeliosSelect at
button and adjusted using the pen
22
units via a mobile end device.
®
. The collapsed ventilation
EN
Publicité
