WALL OUTLET
10
WALL OUTLET
Vent through wall
Fig. 15: Loosen the motor's screws
Fig. 16: Rotate the motor.
22
The motor in the hood can be rotated 90 degrees, so that the vent
can be run out between the walls, follow below:
Loosen the motor's screws ().
1.
Press or tap carefully on the precut back plate to knock it out.
2.
(/1).
Rotate the motor and set it in the open hole behind.
3.
Now screw the 4 screws to permanently mount the motor.
Use the tapped plate to close the hole at the top, with the
4.
accompanying 2 screws (/2).
Contact us for questions ().
HOOD USER GUIDE ENGLISH
23.02.2023