Silverline HO0002 006 Instructions De Montage page 19

9 ASSEMBLY OF PRODUCT
Fig. 11
Checking the Wall
23.02.2023
1- Flap Pin Socket
2- Flap Pin
The device mounting accessories include two hood flaps Attach
these flue flaps to the motor exhaust as seen below
Insert the plastic pin (area no.2) on the pin socket on the motor

exhaust (area no.1 ).Fig. 11(Fig. 11 Then bend the flap lightly
to insert the other pin on the flap and insert the other pin to its
socket (Fig. 11).
Wall must be flat, straight and have sufficient bearing capacity.

Depth of drilling holes must comply with the length of bolts.

The nuts and dowels provided are suitable for brick walls. For

other construction material (e.g. drywall, plate, porous con-
crete), suitable fixing dowels and nuts shall be used.
Fig. 12
DANGER!
Before drilling, ensure that there are no power, gas
or water pipes in the close proximity of the drilling
locations.
HOOD USER GUIDE ENGLISH
ASSEMBLY OF PRODUCT
19