Oregon Scientific WMR100 Mode D'emploi page 9

CLOCK / CALENDAR
To manually set the clock:
(You only need to set the clock and calendar if you have
disabled the clock radio reception.)
1. Press SELECT to navigate to the Clock Area.
will show next to the Area.
2. Press and hold MODE to change the clock setting.
The setting will blink.
3. Rotate the dial left or right to decrease or increase
the setting value.
4. Press MODE to confi rm.
5. Repeat steps 1 to 5 to set the time zone offset
hour (+ / -23 hours), 12 / 24 hour format, hour,
minute, year, date / month format, month, date and
weekday language.
NOTE If you enter +1 in the time zone setting, this will
give you your regional time plus 1 hour.
NOTE The weekday is available in English, French,
German, Italian or Spanish.
To change the clock display:
1. Press SELECT to navigate to the Clock Area.
will show next to the Area.
2. Press MODE to toggle between:
• Clock with Seconds
• Clock with Weekday
• Calendar
CLOCK ALARM
The clock has 2 alarms that can be set to sound with
a beep.
ICON MEANING
Alarm 1 or 2 is displayed
Alarm 1 or 2 is activated
No icons No alarm is set
To set an alarm:
1. Press SELECT to navigate to the Clock Area.
will show next to the Area.
2. Press ALARM to toggle between alarm 1
alarm 2 display.
3. When you've selected the alarm you wish to
change, press and hold ALARM. The alarm setting
will blink.
4. Rotate the dial left or right to change the setting.
5. Press ALARM to confi rm.
All manuals and user guides at all-guides.com
To activate / deactivate an alarm:
1. Press SELECT to navigate to the Clock Area.
2. Press ALARM to toggle between alarm 1
3. Press MEMORY /
MOON PHASE
The Calendar must be set for this feature to work (see
Clock / Calendar section).
AUTO SCANNING FUNCTION
To activate the outdoor temperature and humidity
auto-scan function:
1. Press SELECT to navigate to the Temperature or
2. Press and hold MODE to activate auto-scan. The
3. Press MEMORY /
NOTE Channel 1 is used for the outdoor temperature
and humidity sensor in the remote wind sensor.
Additional temperature and humidity sensors can use
other channels.
WEATHER FORECAST
The weather display in the top part of the screen shows
the current weather and the weather forecast for the next
12-24 hours within a 30-50 km (19-31 mile) radius.
Weather Forecast Area
ICON
8
will show next to the Area.
alarm 2
deactivate the alarm.
alarm is activated.
ICON DESCRIPTION
New moon
Waxing crescent
First quarter
Waxing gibbous
Full moon
Waning gibbous
Third quarter
Waning crescent
Humidity Area. will show next to the Area.
temperature and humidity display will scroll from
indoor to ch1 through to ch10.
ON/OFF or MODE or
ALARM to stop the auto-scan.
DESCRIPTION
Sunny
Partly cloudy
and
to activate or
appears when the