Publicité
Les langues disponibles
Les langues disponibles
Before plugging in
Check that you have a socket which is compatible with the plug supplied with the fridge. DO
NOT SWITCH ON UNTIL FOUR HOURS AFTER MOVING THE FRIDGE.
The coolant fluid needs time to settle. If the appliance is switched off at any time, wait 30
minutes before switching back on to allow the coolant fluid to settle.
Before filling your fridge
Before storing foods in your fridge, turn the fridge on and wait for 4 hours to make sure it is
working properly and to allow the fridge to fail to the correct temperature.
4. OPERATING YOUR APPLIANCE
Temperature Control
Your refrigerator has one control for regulating the temperature. The temperature control is
located on the lower right-hand corner.
The first time you put your appliance into operation, set the thermostat to "4" and let it run
empty for 4 hours before storing food for it to cool sufficiently.
The range of the temperature control is from position" 1" the warmest to "7" the coldest.
Adjust the temperature control to the setting that best suits your needs. The setting of "4"
should be appropriate for home or office refrigerator use.
To turn the refrigerator off, turn the temperature control to 0.
Appliance thermostat has 7 settings (without setting 0). The appliance assures that
temperature is maintained as long as it is in operation and that it is used in normal conditions
of use. The temperature inside the appliance can be influenced by many factors: ambient
temperature, sun exposure, number of door's opening and amount of food stored... The
slight changes in temperature are perfectly normal.
• Setting 1 – 2: the temperature range of the refrigerator compartment is 7~10 ℃,
• Setting 3 – 4: the temperature range of the refrigerator compartment is 5~7 ℃,
• Setting 5 – 6: the temperature range of the refrigerator compartment is 2~5 ℃,
•
Setting 7: the temperature range of the refrigerator compartment is ≤ 2 ℃,
27
Publicité
