Error Messages; Mounting Alternative Backs - Hexagon TESA DIGICO Série Mode D'emploi

Error messages

If the battery level is too low, display shows the
battery symbol oppposite.
If the reference needs to be defined, display
shows ERR 0 for 2 seconds, and then keeps on
displaying the two arrows opposite.
During a data transmission through the RS232 interface, ERR1
or ERR2 may appear on display. The first error message means
that a transmitted sign is not allowed, the other that the com-
mand is unknown.

Mounting alternative backs

Undo the 4 tightening screws marked witj A before mounting ei-
ther of the optional backs (see below).
Do not remove the screw marked with B since this screw serves
to protect the
Fig. 1
Fig. 3
sensor.
0,7
6
ERR 0
Fig. 2
Fig. 4
21