RS Data transmission
Plugging the OPTO connector
1
1
Remove the protective lid.
2
Plug in the OPTO connector.
USB data transmission
Plug in the OPTO-USB cable (No. 04761062) to your computer.
Install all drivers available from the CD-ROM provided with the
cable.
Your Digico is now ready for use in the bidirectional mode.
RS232 data transmission
Data rate
Parity
Start bit
Stop bit
Character output
All transmitted data as requested are ended with <CR><LF>.
2
4800 bauds
even
1
2
7 ASCII code bits
15