Switching Off; Function Keys; Operating Any Digico; Digico 200-600 - Hexagon TESA DIGICO Série Mode D'emploi

Switching OFF

Your indicator turns itself off after 50 minutes if not in use. The
reference value is never lost, and the tool always returns to the
last enabled mode.
Keeping pressing this key (>5s)
OFF. To have it ON again, press any key on the keypad. Note that
switching on using this key
celled.

Function keys

Releasing the relevant key enables each function
Press and release: 0 to 1s.
Press and hold: 1s to 3s.
Press and hold (3s to

Operating any Digico

Digico 200-600

1. To choose desired measuring mode, press this key
MODE
ABS-DIFF
MAX-MIN
Editing
(PRESET-
TOL)
The gray coloured background only applies to the three-button models.
0 to 1s.
Toggles from
ABS to DIFF
Toggles from
MIN/MAX to
MAX-MIN
Jumps
to next digit
switches the indicator
causes all settings to be can-
∞
).
1s to 3s.
Switches from
a mode to another
PRESET =>
MAX-MIN =>
TOL =>
ABS-DIFF =>
PRESET ...
Holding the MODE button al-
lows you to scroll through the
various modes, provided that
the main reference could be
first captured..
.
MODE
.
∞
3s. to
7