Requests - Hexagon TESA DIGICO Série Mode D'emploi

Request Meaning
? Display value requested
ID? Product manufacturer and serial number
requested
VER? Programme version requested
UNI? Selected unit (mm or in) requested
MM Metric unit system enabled
IN Inch unit system enabled
RST Factory settings enabled (RESET)
CLR Zero-setting of display (DIFF mode)
No action taken (ABS mode)
KEY0 Unlocked keypad
KEY1 Locked keypad (except for the Functions
«DATA» and «RESET»)
KEY2 Keypad locked up («RESET» only remains
available)
KEY? Keypad status requested (0, 1 or 2)
OUT0 – Enable/disable continuous data transfer (8x
OUT1 per second). This operation ends up automati-
cally as the indicator switches on standby.
OFF Switch the indicator OFF
ON Switch the indicator ON
(or trigger any other RS-Command)
INV0 Unreversed counting sense
INV1 Reversed counting sense
INV? Counting sense status requested (0 or 1)
RES0 Choosing the resolution (0,01 mm/.0005 in)
RES1 Choosing the resolution (0,001 mm/.00005 in)
RES? Chosen resolution requested
BAT? Battery level requested (0-NOK, 1-OK)
X? Value of built-in counter requested
17