Main Technical Data - Hexagon TESA DIGICO Série Mode D'emploi

Request Meaning
MODx Choosing measuring mode
X=0: ABS, 1: DIFF, 2: MAX, 3: MIN,
4: MAX-MIN, 5: Tolerances
MOD? Selected mode requested
STM Saving PRESET value in the active memory
PRE xxx Entering PRESET value; xxx = true
xxxx.xx or -xxxx.xx mm /
xx.xxxx or -xx.xxxx in
xxx.xxx or -xxx.xxx mm /
x.xxxxx or -x.xxxxx in
PRE? PRESET value requested
TOLH xxx Enter upper tolerance
TOLL xxx Enter lower tolerance
TOL? Tolerance values requested
FAC xxx Multiplication factor of displayed value,
xxx = ± 010.000
FAC? Multiplication factor requested
All transmitted data as requested are ended with
<CR><LF>.
Any RS command that is not compatible with the indica-
tor's version are answered with an error message.

Main technical data

– ABS/DIFF measuring modes (models 400-700).
– Metric/Inch unit system.
– Rotating front case housing. Clockwise rotation
through 180° or 90° in the opposite direction
(models 400-700 only).
– Large digital/analogue display with bar graph,
10 mm digit height.
– Measuring force <2 N.
– Displacement speed of the plunger: < 2 m/s.
– Lithium-battery 3V, type CR 2032 (No. 01961000).
– Dimensions according to DIN 878, ISO R463 and
JIS 7503 compliant.
18