Télécharger Imprimer la page

Black & Decker LST136 Manuel D'instructions page 12

Masquer les pouces Voir aussi pour LST136:

Publicité

Les langues disponibles

Les langues disponibles

• Align the tabs on the spool
cap with the slots (R1) in the
housing (figure R).
• Push the cap onto the
housing until it snaps securely
into place.
To avoid tool
damage, if the cutting line
CAUTION:
protrudes beyond the
trimming blade, cut it off so that it just reaches the blade.
REWINDING SPOOL
NOTE: Hand wound spools from bulk line are likely to become
(USE ONLY .065 IN. ROUND DIAMETER LINE) (FIGURES S,T & U)
tangled more frequently than Black & Decker factory wound
spools. For best results, factory wound spools are
recommended.
To rewind spool, follow the steps below:
• Remove battery from tool.
• Remove the empty spool
from the tool as described
in "REPLACING THE
• Make a fold at the end of
SPOOL".
the cutting line at about 3/4
inch (19mm)(S1). Feed the
cutting line into one of the
line holding slots (S2) as
shown in figure S.
All manuals and user guides at all-guides.com
R
R1
S
S1
S2
• Insert the 3/4 inch (19mm)
end of the bulk line into the
hole (T1) in the spool
adjacent to the slot as
shown in figure T.
R2
• Wind the cutting line onto the spool in
the direction of the arrow on the spool.
Make sure to wind the line on neatly and
in layers. Do not crisscross (figure U).
• When the wound cutting line reaches
the recesses (T2), cut the line. (figure T).
• Fit the spool onto the tool as described
in "REPLACING THE SPOOL".
The RBRC™ (Rechargeable
THE RBRC™ SEAL
Battery Recycling Corporation)
Seal on the Li-Ion battery (or
battery pack) indicates that the costs to recycle the battery (or battery
pack) at the end of its useful life have already been paid by Black &
Decker. RBRC™ in cooperation with Black & Decker and other
battery users, has established programs in the United States to
facilitate the collection of spent Li-Ion batteries. Help protect our
environment and conserve natural resources by returning the spent
Li-Ion battery to an authorized Black & Decker service center or to your
local retailer for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery.
trademark of the Rechargeable Battery Recycling Corporation.
12
T2
T
T1
U
is a registered
RBRC™

Publicité

loading