Bosch C-IR 20 Notice D'installation Et D'utilisation page 35

• Estimation of the cost and consumption of the installation
2.5 Specifications
This product conforms to European directives and supplementary
national requirements in design and operation. Compliance is
demonstrated by the CE marking.
You can request the conformity declaration of the product. If you require this,
contact the address on the back cover of these instructions.
Purpose of control
Control construction
Screwless terminal method of
disconnection
Action type
Batteries
Power consumption
Regulation characteristics
Protection
Sensing element extension
Measured temperature precision
Environmental temperature:
Operating temperature
Shipping and storage temperature
Setting temperature range
Comfort, Reduced
Holiday /Antifreeze)
Control pollution degree
Maximum load
Rated impulse voltage
C-IR 20 – 6721851970 (2023/10)
Thermostat
Electronic independently mounted control
Type X
Type 1 only
1 x ML 1220
~2.5W
PID (10 min cycle for load command) or
Hysteresis of 0,5 °C
IP20/21, class II (refer to the data plate on
the backside of the product for more
information)
Temperature
0,1 °C
0 °C to -40 °C
-10 °C to +50 °C
5 °C to 37 °C by 0,5 °C step
7 °C (adjustable)
2
Relay 16 Amps, 250VAC
2500V
Product Information
35