HOW TO CHARGE THE SCOOTER
1.
Open the charge port cover. Make sure it is clean and dry.
2.
Connect the charger with the battery and the other end to the power supply. Check the
battery indicator is on.
3.
The light indicator on the charger will change when it reaches 99 % charge.
5_
Press the throttle push button to speed up.
WARNING: do not ride too fast.
6_Press the brake to stop or decrease speed.
Press the rear fender with the foot to assist the
braking process.
7_Only get off the scooter when riding at very
low speed or when it is stopped.
31