Eneo NXD-980IR37P B Guide D'installation Rapide page 18

Connecting to the RJ-45
Connect a standard RJ-45 cable to the network port of the network camera.
Generally a cross-over cable is used for directly connection to PC, while a
direct cable is used for connection to a hub or switch.
microSD card slot
Insert the microSD card.
microSD card
Connecting the Power
Connect the DC 12V power adaptor to the camera. (This connection is not
used if using PoE power)
Network Connection and IP assignment
The Network Camera supports the operation through the network. When
a camera is first connected to the network it has no assigned IP address.
So, it is necessary to allocate an IP address to the device with the "eneo
Scan Device" tool found on the supplied CD. The factory default IP is
"192.168.1.10"
NOTE: For more information, refer to the eneo Scan Device tool
Manual.
18
All manuals and user guides at all-guides.com