Panasonic PT-47WX52C Manuel D'utilisation page 27

R
EMOTE
Programming The Remote
The Universal Remote Control can be programmed to operate many manufacturers' components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
Programming With a Code
Procedure
• Confirm that the external component is plugged and operating.
• Turn the component off.
ACTION
• Press and
• Press appropriate component button on the Remote Control VCR, DVD (CD), AUX (VCR2 or TAPE), RCVR, DTV,
CABLE or DBS.
• Enter the 3-digit component code using the Remote Control numeric keypad (0 ~ 9 buttons).
Press the Remote Control
•
turn on.
Programming Without A Code
This procedure searches all codes and is called the "sequence method."
• Confirm that the external component is plugged in and on.
• Turn the component off.
ACTION
• Press and
• Press appropriate component button on the Remote Control.
• Press to move forward to the next code. Press
VOL
• Press the Remote Control
on.
Note: Repeat the above steps until the component code is found. It may take many attempts before the correct code
is found.
• After the code is found, press
C O
ONTROL PERATION
Default Modes For Remote Control
Device Operates
TV TV (Panasonic Only)
DTV-STB DTV (Panasonic Only)
CABLE CABLE (Preset)
DBS DBS (Preset)
VCR VCR (Preset)
DVD/CD DVD and CD (Preset)
Personal Video Recorders,
AUX
Tape and VCR2
RCVR Audio Receiver (Preset)
together, for at least 5 seconds.
POWER
to test the component. If the procedure was successful, the component will
POWER
Helpful Hints: Unsuccessful Code
If the component does not operate with the Remote Control, repeat
the procedure using another code. (Some brands have multiple
codes).
If an incorrect code is entered, or if the procedure takes longer than
30 seconds, the programming will fail.
together, for at least 5 seconds.
POWER
to test the component. If the procedure was successful, the component will turn
POWER
ACTION
to store the code.
( PT-47WX52C, PT-53WX52C
MODELS
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video
Recorders Code
Panasonic RCVR Code
to move backward.
VOL
AND
Default
PT-56WX52C)
25