Publicité
Les langues disponibles
Les langues disponibles
Other Adjustments (contd.)
CONVERGENCE 1 - In SET UP menu select CONVERGENCE 1 under OTHER ADJ. only after moving the PTV to adjust for the
effects of the earth's magnetic field on the projection tubes. Only use the remote control buttons while adjusting
convergence. The front control panel navigation and Action buttons have no effect.
Note:
Convergence seldom needs adjusting except after moving the PTV.
Use the navigation buttons on the remote control to align the horizontal and vertical green lines on screen with the outside
reference marks on screen frame, as shown below.
SET UP
IDIOMA/
LANGUE
AUTO POWER ON
CHAN BANNER
PROG CHAN
CONVERGENCE 1
CC
CONVERGENCE 2
OTHER ADJ.
Use the navigation buttons on the remote control to align the red cross with the white cross pattern at the center of the screen.
CONVERGENCE
NEXT : ACTION
Note:
To prevent picture tube damage do not leave test pattern on for an extended period of time.
Press VOL
SET
K
ON
K
K
ACTION
Press
RED
menu.
Then repeat procedure for adjusting blue.
An adjusted cross pattern appears white with a
minimum of color fringing.
screen frame
to display next menu.
Press
to display BLUE convergence
Convergence Adjustment
R
G
I
OLLER
UIDE
CON
Reference Marks
ACTION
to display RED convergence menu.
ACTION
Press
to store adjustments and to
display normal picture.
M
O
ENU
PERATION
CONVERGENCE
GREEN
NEXT : ACTION
CONVERGENCE
BLUE
NEXT : ACTION
35
Publicité
